Page 1 sur 1

Shanling H5

Publié : 14 juin 2023 19:35
par Squyzz
Shanling annonce un nouveau DAP, à moins que ce soit un DAC/AMP.
Comment ça ?
Si je comprends bien c'est un équivalent du Poly-Mojo de Chord.
Image

Image
- Rounded Design for comfortable carry

- Based on Ingenic X1000 platform, with 0.87-inch screen for device control

- Integrated MicroSD card slot and local music player (With remote control by Eddict Player app)

- Pair of AKM AK4493S DACs, with similar warm tunning to our M6 Ultra

- 3.5mm, 4.4mm and RCA output

- USB, Coaxial, Optical, Bluetooth input

- Xmos XU316 USB chip

- Amplifier design based around TPA6120 and LTA8092

- Higher output impedance (4.7 Ohm for 3.5mm // 6.6 Ohm for 4.4mm)

- Lower power than H7, at 840mW @ 32Ohm

- Lithium battery 3500MAH/3.8V

- Battery life up to 12.5 hours, depending on exact usage
Specification

Dimensions:102 x 85 x 25 mm

Weight: 270.4 g

Screen:0.87-inch Screen

Audio formats: DSD(".iso",".dsf",".dff") / ISO / DXD / APE / FLAC / WAV / AIFF / AlF / DTS / MP3 / WMA / AAC / OGG / ALAC / MP2 / M4A / AC3 / M3U / M3U8/ OPUS

USB Input Hi-Res Support:32 bit / 768 kHz, DSD 512

MicroSD Hi-Res Support:32 bit / 384 kHz, DSD 256

Gain Setting: Three Level Setting

Storage: MicroSD Card Slot, up to 2TB

DAC:2x AKM AK4493SEQ

Digital Filters:6 Preset Filters

Bluetooth 5.0 Receiver

Bluetooth Codec Support: LDAC / AAC / SBC



Outputs:

Single-Ended Output:

Output Power: 2.7V@32Ω(227mW@32Ω)

Frequency Response:20 Hz - 40 kHz (-0.7 dB)

THD+N:0.0014%

Channel separation:80 dB @ 32 Ohm

Dynamic Range:118 dB

Signal-To-Noise:118 dB

Output Impedance:4.7 Ohm



Balanced Output:

Output Power: 5.19V@32Ω(840mW@32Ω)

Frequency Response:20 Hz - 40 kHz (-0.7 dB)

THD+N:0.0004%

Channel separation:105 dB @ 32 Ohm

Dynamic Range:121 dB

Signal-To-Noise:121 dB

Output Impedance:6.6 Ohm
Tarif : 369 USD