![:lool: :lool:](./images/smilies/msp_lol.gif)
ps: Merci Squyzz!
Ouais, d'où Fiio sort un DAP de nul part ?MrButchi a écrit :" M3—Portable music player (Quality Made in China)" Il te faut VRAIMENT plus de détails titi ?
Donc, on apprend que:head-fi a écrit : Updated on 10/9/2015
1, Dimension: 128 * 16.5 * 64 mm
2, Screen: 3.97 inch 800*480 full touch IPS
3, Battery life: up to 10 hours ( with IEM amp module, Display off ).
4, Battery: 3700mAh.
5, Hardware buttons: power, play/pause, previous/next, volume+/- and one secret bottom.
6, Input/Output interface:
- Micro SD slot X 1
- Micro USB X 1 ( As docking connector too, it is a 11 pins Micro USB socket )
- 3.5mm Line Out/ Coaxial output X 1 ( Switched in the setting menu )
- Headphone out X 1, the output jack will changed from 3.5mm output jack, 4 pin balanced output ( same as ALO/RSA ), depended on the headphone amp module is installed.
7, Build in Memory: 32 GB .
8, Wifi/Bluetooth: 802.11g/b/n, Not APT-X.
9, DAC chip: ESS9018 X 1, ESS9018 already includes 8 channels DAC so it does not need 2 DAC chips. L/R both are quad DAC
10, OP and Buf for AMP: Depended on headphone amp module.
11, Output power : 100mW/32 ohms, 200mW/16 ohms ( IEM module ).
12, Soc: RK3188
13, RAM: 1GB
14, Weight: 220g ( With IEM module )
15,S/N: 117dB
16: THD+N: 0.002%
17, Output impedance: < 1 ohms
18, Crosstalk: > 72dB ( PO ), > 110dB ( LO )
19, Output level: 1.5V ( LO )
20, M.S.R.P: 649.99 ( In U.S.A )
Below is our release plan, it is for Chinese customer but it is also value to you guys:
The X7 market release will come in four steps.
1,First 100 units are targeted for release at the end of September, to be sold at 20% off directly to FiiO’s VIP customers. The firmware will be beta at this stage.
2,Second batch of 400 units are targeted for release on 15 October, to be sold at 12% off directly to existing FiiO customers. The qualification of being an “existing FiiO customer” is to be established by product registration at http://www.fiio.net, with the X7 to be shipped to early registrants first. Register your FiiO products by clicking the link here:
The firmware will be FW1.0 at this stage.
3,Third batch of 1500 units are targeted for release on 30 October; these will be sold through our agents in China.
4,X7 stock will be provided to our agents worldwide starting from the fourth batch at the end of November.
C'est bien vu d'avoir mis un grand écran pour un DAP mais sans en faire trop. Le format 4 pouces est parfait pour naviguer, sans en faire un truc trop encombrant (de toute façon le DAP ne serait pas plus petit avec un écran plus petit vu ce qu'il embarque comme matos sous le capot...). IPS en plus, miam ! (enfin ?)GourouLubrik a écrit : 2, Screen: 3.97 inch 800*480 full touch IPS
Les DAP qui ont un double-ESS9018, ce sont des "16 DAC" du coup ?GourouLubrik a écrit : 9, DAC chip: ESS9018 X 1, ESS9018 already includes 8 channels DAC so it does not need 2 DAC chips. L/R both are quad DAC
J'aurai dit plus. C'est Signal to Noise Ratio.kyo9999 a écrit :Moins ya de DB en SNR mieux c'est ?
je crois que c'est des doubles de la version mobile de ce chipset qui lui n'a que 4 canaux. (ES9018K2M)kookaburra a écrit : Les DAP qui ont un double-ESS9018, ce sont des "16 DAC" du coup ? :8
Donc lui a bien "16 DAC" du coup. C'est pire que les Octocoeurs des smartphones, sont fous quand même.riton a écrit :Le HM901 est bien un double 9018
Merci pour cette éclaircissementjecr a écrit :J'aurai dit plus. C'est Signal to Noise Ratio.kyo9999 a écrit :Moins ya de DB en SNR mieux c'est ?
Je pense que ce que veut dire notre légiste en chef, c'est que c'est "pas mal" dans l'absolu, mais que c'est encore mieux que le DX100.